Cleaning and maintenance tips
Prettily hidden.
Emco carpet mats are available in a range of designs. Most of them have a pattern or logo on them. Due to the function of the mat to hold dirt, the design “hides” behind the dirt that is held. Regular care of the products opens the fibres for increased dirt uptake and allows the design to shine again. And the need for the next clean is automatically displayed by the mat when the design could do with another refresh.
Correct prevention
Emco carpet mats are is designed for use in buildings. We recommend the use of carpet mats as a third zone for moisture and residual dirt. Zone one for coarse dirt and zone two for fine and damp dirt. The Outdoor carpet mat product can be used not only in indoor areas, but also in roofed outdoor areas (coarse dirt).
All of the mats with a rubber backing (all of the mats that can be washed in a washing machine according to the washing recommendations) are subject to the risk of fading (FAQ) due to the influence of UV and ozone. It can lead to colour loss of the mats and permanent discolouration of the indoor floor covering. This damage is not covered by the guarantee. A regular (at least every 4 weeks) washing cycle prevents the risk of fading.
The PromoMat Basic and the PromoRunner Basic are subject to the risk of plasticiser migration (FAQ) if the products are laid on a (design) floor. Installing a separating layer (emco Exakt) is recommended. The separating layer prevents the risk of plasticiser migration.
The right preparation
After delivery, all emco carpet mats should be washed in line with the recommendation in order to remove production-related chemical residues and lift the pile. This helps to improve dirt and moisture absorption and improves the high-quality appearance of the mat. The colour brilliance of logo mats is also enhanced.
Mats that are let into cut-outs should be washed and dried approx. 3-5 times before being cut to size in order to avoid subsequent shrinking.
Correct storage
The mats should not be unnecessarily exposed to high temperatures for a long time. To protect the colours, we recommend dry storage at room temperature in a dark place.
Mats with a rubber backing (all mats that can be washed in a washing machine according to the washing recommendations) can be stored flat or rolled up. If storing flat, stack with the backing on the pile side. If stored rolled, roll the rubber side on the outside. The mats should never be folded or bent!
Mats without a rubber backing (hand wash only) must be stored flat, stacked with the backing on the pile side. The border of the PromoMat Basic and the PromoRunner Basic must never be bent. Irreparable stress whitening (FAQ) may occur and make the border become brittle.
A quick maintenance wash
All emco carpet mats can be quickly and easily cleaned with a powerful brush vacuum cleaner. The brushes also lift the pile upright again and keep the pile layer (FAQ) “open” to new dirt.
Washing Image Eco, Smart, Logomat Business, Logomat Express, Logomat Basic
By machine:
Emco carpet mats of the above-mentioned types can be washed in a standard washing machine. It is essential to adhere to the capacity of the washing machine and it must not be exceeded. Find the weight of the product on our data sheets. The washing temperature should be between 40°C and 50°C.
A standard colour detergent can be used to wash the mats in a domestic washing machine. Do not use any laundry additives, such as fabric conditioner or disinfectant.
In an industrial washing machine (only applies to Image Eco!) anionic detergent without optical brighteners should be used. Non-alkaline detergent should be used. The washing liquor should not exceed a pH value of 8.
Do not wash emco carpet mats of the above-mentioned types with mats from other manufacturers. Some logo mats from other manufacturers may leak dye that can then deposit on other mats.
The products can be dried in a tumble drier between 65° and 80° for approx. 7 minutes. Then dry for another 7 minutes at a lower temperatures (approx. 30°C to 40°C).
The mats must be removed from the machine carefully because strong tugging can result in damage to the border.
By hand:
Emco carpet mats of the above-mentioned types can be cleaned with a pressure washer (distance at least 30cm) in a suitable location. The water temperature should not be more than 60°C. Then hang the mat up and leave it to dry. In the case of heavy soiling, a cleaning product can be applied to the mat with the pressure washer prior to cleaning and carefully worked in with a brush. The cleaning product can also be added to the pressure washer water. Use a neutral cleaning product*. Never use solvents based on chlorinated hydrocarbons!
Washing Classic
By machine:
Emco Classic.can be washed in a standard washing machine. It is essential to adhere to the capacity of the washing machine and it must not be exceeded. The washing temperature can be max. 80°C.
A standard colour detergent can be used to wash the mats in a domestic washing machine. Do not use any laundry additives, such as fabric conditioner or disinfectant.
Anionic detergent without optical brighteners should be used in an industrial washing machine. Alkaline or non-alkaline detergent can be used.
The product can be washed with other mats without any problems.
The products can be dried in a tumble drier between 65° and 80° for approx. 7 minutes. Then dry for another 7 minutes at a lower temperatures (approx. 30°C to 40°C).
The mats must be removed from the machine carefully because strong tugging can result in damage to the border.
By hand:
Emco Classic can be cleaned with a pressure washer (distance at least 30cm) in a suitable location. The water temperature should not be more than 80°C. Then hang the mat up and leave it to dry. In the case of heavy soiling, a cleaning product can be applied to the mat with the pressure washer prior to cleaning and carefully worked in with a brush. The cleaning product can also be added to the pressure washer water. (Use a standard cleaning product*). Never use solvents based on chlorinated hydrocarbons!
Washing Image Outdoor
By machine:
Emco Image Outdoor can be washed in a standard washing machine. It is essential to adhere to the capacity of the washing machine and it must not be exceeded. The washing temperature can be max. 40°C.
A standard colour detergent can be used to wash the mats in a domestic washing machine. Do not use any laundry additives, such as fabric conditioner or disinfectant.
Anionic detergent without optical brighteners should be used in an industral washing machine. Non-alkaline detergent should be used. The washing liquor should not exceed a pH value of 8.
Due to the stickiness of the fibres, the product should not be washed together with other mats.
Excessive tugging of the mats out of the machines should be avoided because this results in damage to the border.
By hand:
Emco Image Outdoor can be cleaned with a pressure washer (distance at least 30cm) in a suitable location. The water temperature should not be more than 40°C. Then hang the mat up and leave it to dry. In the case of heavy soiling, a cleaning product can be applied to the mat with the pressure washer prior to cleaning and carefully worked in with a brush. The cleaning product can also be added to the pressure washer water. Use a neutral cleaning product*. Never use solvents based on chlorinated hydrocarbons!
Cleaning PromoMat Basic, PromoMat Soft
The PromoMat Basic and PromoMat Soft can be cleaned with a pressure washer (distance at least 30cm) in a suitable location. The water temperature should not be more than 40°C. Then hang the mat up and leave it to dry. In the case of heavy soiling, a cleaning product can be applied to the mat with the pressure washer prior to cleaning and carefully worked in with a brush. The cleaning product can also be added to the pressure washer water. Use a neutral cleaning product*. Never use solvents based on chlorinated hydrocarbons!
Cleaning PromoRunner Basic, PromoRunner Soft
Depending on the level of dirt, the PromoRunner Basic and PromoRunner Soft are suitable for cleaning using the spray extraction method or a pressure washer.
In the spray extraction method, water is injected under high pressure (with the addition of a neutral cleaning product if necessary) into the product and subsequently sucked out. Finally, the products are rinsed with clear water several times.
When cleaning with a pressure washer (distance at least 30cm), clean in a suitable location. The water temperature should not be more than 40°C. Then hang the mat up and leave it to dry. In the case of heavy soiling, a cleaning product can be applied to the mat with the pressure washer prior to cleaning and carefully worked in with a brush. The cleaning product can also be added to the pressure washer water. Use a neutral cleaning product*. Never use solvents based on chlorinated hydrocarbons!
Effective stain removal
Treat stains as early as possible as some substances can cause permanent damage to fibres and inks. How quickly you act will determine how successfully the mat can be cleaned. Nearly 80% of all fresh stains can be removed with clean water. Sponge off and absorb liquids with a towel (or something similar). Concentrated, dried-in substances such as chewing gum must be loosened (e.g. with a scraper) and brushed out. Water-soluble stains should be remoistened with a little water and sponged off. Please note that stains must be sponged off and not rubbed in. Always work from the outer edges inwards to avoid making the stains bigger. Repeat this process if necessary. If you are not able to remove stubborn stains using this method, contact us for recommendations of suitable products.
* The cleaning product manufacturer’s instructions for use and dosage must be strictly adhered to.
Note
We do not accept any liability for damage resulting from failure to observe these cleaning and care instructions or from improper use of emco products.