Street dust, hair, sand, ash, textile fibres, small leaves and twigs, loose chippings, coarse sand, small gravel particles
Outside (Zone 1)
Outside (Zone 1)
Produkt nicht mehr verfügbar
emco LIMBUS
Login to view prices
Ideal for entrances in outdoor areas without mat well or frame.
| Approx. height (mm) | 10.5 |
|---|---|
| Weight (kg/m²) | 06,3 |
| Tread surface | Octagonal honeycomb pattern with leading edge at side. Dimensional tolerance +/- 1.5% |
| Material | High-quality solid rubber, weather-proof and abrasion-proof |
| Water drainage | Ribs on the underside combined with open honeycomb bases ensure good water drainage even where the construction height is low |
| Custom mats | Can be cut to rectangular shapes (only possible without leading edge) |
| Panel size in mm | 1520 x 920 |
| Dirt collection zone | Outside (Zone 1) |
| Examples of type of dirt | Street dust, hair, sand, ash, textile fibres, small leaves and twigs, loose chippings, coarse sand, small gravel particles |
| Type of dirt | Rubber honeycomb mats |
| Mat type | Rubber honeycomb mats |
| Area | Outdoor areas |
Frequently Asked Questions
The door drags across the mat - what to do?
Depending on the inlay of the entrance mat, the product may be slightly higher than the indicated 12, 17 or 22mm. That's right, so that the insert protrudes a little from the frame and can develop its effect. In rare cases, it may cause the door...
Read More
Read More
What is a minor repair at Commercial entrance mats?
By minor repairs we mean repairs that can be carried out on site without the use of spare parts on 10% of the bars. This includes, for example, fixing of inserts, grinding of profiles or straightening of bent profiles (according to feasibility).
Read More
Read More
What is a fine adjustment for Commercial entrance mats?
With the help of fine adjustment, an exact fit of the entrance mat to the frame is made. The mat is compressed, left out, sanded or sawn in partial areas or in its entirety so that the product can be optimally embedded in the frame. After the...
Read More
Read More
What is a "mat bed"?
Mat bed refers to the recess/depression/entrance in the floor into which an entrance mat is placed. The well-prepared mat bed is the basis for the longevity of the product. An uneven (not flat) mat bed can cause the entrance mat to stand up and...
Read More
Read More
How do I care for & clean my Commercial entrance mats?
Here you will find the cleaning and care instructions for our Commercial entrance mats. We will be happy to help you with the care. Get to know our extensive range of services.
Read More
Read More
Is a centered division always correct?
No. Once the mat is divided, the entrance situation should be carefully considered. Depending on the planning of the passenger traffic on site, a central division of the mat can be right as well as wrong. For individual planning please contact...
Read More
Read More
Can I still do without the factory standard division?
Yes. You can specify with us a division according to customer requirements. We try to consider and implement every wish. We ask for your understanding that we have to pass on the use of more personnel for the assembly and additional costs for the...
Read More
Read More
Why is a mat divided?
By dividing the input mat, section weights are reduced and the product becomes more manageable to reduce workloads in manufacturing, installation regular cleaning.
In 2020, 32 percent of all sick days in Germany were due to musculoskeletal or...
Read More
Read More
What is a factory standard division?
The factory standard pitch gives mutually dependent values from when an entrance mat is divided in width and/or walking depth. Currently, an entrance mat is split when it exceeds 30kg, or when the walking depth exceeds 2000mm or the bar length...
Read More
Read More
Is there a warranty for Commercial entrance mats?
Yes. For our Commercial entrance mats Original we provide 4 years warranty. For our Commercial entrance mats Premium we provide even 5 years warranty. You can find more detailed information in our warranty conditions.
Read More
Read More
Are there special solutions for the object area?
Yes. Contact us personally and let us advise you. Outside business hours? We report!
Contact now
Read More
Read More
How high should an entrance mat be?
Our Commercial entrance mats are available in heights of 12mm, 17mm and 22mm. Additionally still in an extremely resilient variant in 42mm.
The most common height is 22mm. This is not only more resilient than the heights 12 and 17mmm, it is...
Read More
Read More
Download brochure now
Strong protective shield for the entrance
EMCO Service Refit
We promise a top notch Service. From planning and measuring to installation and afterwards. We are there for you!
- Planning
- Building consultation
- Taking measurements
- Laying service
- Renovation & Renewal
Anodised profiles
Anodised profiles create new design possibilities. The combination with insert types and inlay colours leads to interesting harmonious and contrasting designs.
Online sampling